EMT® 140 Classic Plate Reverberator

EMT® 140 Classic Plate Reverberator

$199.00

Du hast keine Artikel in deinem Warenkorb.

$199.00

Du hast keine Artikel in deinem Warenkorb.

Drei legendäre Hallplatten, kombiniert in einem einzigen leistungsstarken Plug-In.

Das durch die EMT Studiotechnik GmbH autorisierte EMT® 140 Classic Plate Reverberator Plug-In für UAD-2 Hardware und Apollo Audio Interfaces bietet dir genau den organisch-üppigen Raumklang, den nur Hallplatten liefern können.

Durch drei akribisch modellierte, einzigartige und unterschiedliche EMT 140 Einheiten aus den kalifornischen Plant Studios in Sausalito, kannst Du mit dem EMT® 140 Plug-In deinen Signalquellen mit der unverwechselbar warmen und wunderbaren Schönheit dieses legendären Hallgeräts behandeln.

Jetzt kannst Du:

Zwischen drei einzigartig unterschiedlichen EMT-Hallplatten wählen

Natürliche Tiefe und Glanz zu Gesangs- und Instrumentenaufnahmen hinzufügen

Deinen eigenen Sound mit den Parametern der Original-Hardware formen, darunter eine mechanische Dämpfung und System-Eingangsfilter

Den Raumklang der Hallplatten mit exklusiven Reglern der Plug-In-Version weiter betonen, darunter Balance, Width und Modulation

Soundbeispiele

Soundbeispiele
UAD 5-Minuten Tipps
UAD 5-Minuten Tipps

UAD 5-Minuten Tipps

EMT 140 Classic Plate Reverberator Plug-In

Drei fachmännisch emulierte Hallplatten

Drei fachmännisch emulierte Hallplatten

Das EMT 140 Plug-In bietet Dir drei individuelle Klangrichtungen klassischer EMT-Hardware. Die Hallplatten A und B emulieren das elektronische Originalsystem von EMT, dessen Hallplatten bewusst für eine Weile nicht gestimmt wurden. Umgekehrt arbeitet die technisch vollständig gewartete Hallplatte C, das Modell mit dem breitesten Frequenzgang, mit einer modernen Martech-Elektronik.

Neue Regler, mehr Flexibilität

Neue Regler, mehr Flexibilität

Mit im Plug-In exklusiven Funktionen wie Balance, Width und Modulation kannst Du das EMT 140 in einer Weise nutzen, die mit der Hardware nicht möglich waren. Lege für eine monophone Snare über den Balance-Regler eine exakte Position fest, verbreitere Streicher über den Width-Parameter und ergänze per Modulations-Funktion eine Gesangsstimme um subtilen Glanz oder eine intensive Hallfahne. Durch die Erweiterung dieser Parameter zum Original-EMT-Schaltkreis erhältst Du mannigfaltige Plattenhallvariationen für alle denkbaren Klangquellen.

Eigenschaften

Basierend auf drei EMT 140 Hallplatten der Plant Studios – jeweils mit einzigartigem Klangbild

Autorisiert durch die EMT Studiotechnik GmbH

Hochgelobter, geschmeidiger und natürlicher Plattenhall

Modellierung der mechanischen Dämpfungsregler der Original-Hardware

Hochpassfilter in der EMT 80 Hz-Werksvariante und mit Martech-Elektronik

Zu den exklusiven Digitalfunktionen zählen ein zweibandiger Shelving-Equalizer sowie die Parameter Predelay, Width, Balance und Modulation

Benötigt UAD-2 DSP System oder Apollo Interface

User-Rezensionen

EMT® 140 Classic Plate Reverberator

B. Boykin

1. April 2015

This plugin is awesome!!!

I've searched everywhere for a good sounding all around universal plugin and I must say this plugin is now in my heavy rotation of go to plugins.

V. Azevedo

15. Dezember 2014

Sounds lovely

I'm a very great fan of reverbs and have some ones I like to use.
I was watching EMT for a while and, after test it few hours with some of my real mixes, I noticed the it sounds much better than my favorite Plate. I mean it is dense, warm, with nice resolution.
It sounds like a non digital. It sounds real. Good for a lot of things.
It's graphical interface is pretty, simple, fast and easy to use.
EMT now figures my session's Plate's Bus. My favorite reverb now.

Vinnie Azevedo
Mix Eng
www.kinemamusic.com.br
www.audioescola.com.br

G. Mutandwa

14. Dezember 2014

best reverb ever!

This is my go-to reverb, ppl demo this asap it will transform your mixes!!!

T. Spielmacher

15. Januar 2014

Wanted this amazing plugin for awhile now...

Classy, smooth, versatile, elegant and truly professional sounding. So easy to be used in a tasteful way. Brings things to life without the fuss. A terrific and affordable weapon and tribute to the past.

V. Romanov

13. Januar 2014

EMT 140 Plug-In always "at hand"

I often use EMT 140 Plug-In vs Vocal BUS, great space emulation always "at hand". Rival Music pays respect to UAD

C. Freitas

8. März 2013

EMT 140

On 80's I mixed a lot of classic albums here in Brasil at Transamérica Studios in São Paulo using the original EMT 240 and EMT 251 reberbs and when i tried the 140 UA Plug ins i came back 25 years and the new experience was amazing!

B. Trimpe

13. September 2012

The Best Reverb Plugin I have ever used

Jaw dropping. This is the kind of plugin that makes mixing more fun. It adds depth, width, and ambiance. It sounds great on all source material. Reverb plugins usually have really brittle, tinny, a/o false decay tails. I have tried a bunch of other plugins from IK Multimedia, Waves, and a few others. This thing buries them all in terms of sound and usability.

I have been really impressed with most of the UA plugins but this thing is off the scale. I use it on every session now and get amazing results quickly and without fail.

G. Bordarampe

15. August 2012

Sounds just like the original, lush, clear, and great tweaking capabilities. It's my go to plate reverb.

D. Lamb

3. August 2012

The DAWs I use have their own built in reverbs, so to buy another reverb for a back bedroom studio seemed overkill to me. Then I tried the EMT140 Demo...... I expected it to sound great (and it does!) but the surprise was how EASY it was to get a great sound. In very little time, and with only a few tweaks, you're there, you have a reverb that sounds great in your mix.

F. Yaker

4. Juli 2012

I've used many reverb plugins over the years and have always struggled to find one that I really can work with. I find most reverbs to be overly complex and even though I am somebody who uses presets as a basis and adjusts from there, if the options are overwhelming, I get frustrated. This plugin sounds great, but one of the main reasons that I love it is because the controls are few and straight to the point. You can easily adjust the sounds to your taste with the limited amount of knobs. I also want to mention that while most reverbs I always finding myself slowly turning down and down and down until there is a subtle ambience but not a really apparent reverb this might be the first reverb that beckons you to turn it up!

S. Froudist

14. Dezember 2011

The original EMT plate reverb is a steel monster that needs an isolated vault of its own. With only rudimentary damping and EQ, it is more or less a "set and forget" creature. Instead of a soundproof room, the UA version (really three units in one) just needs a UAD card to run on. While lacking some of the more esoteric settings of other types of reverberators, this classic and classy reverb responds well to a bit of tweaking: for example, fine tune the frequency response to compliment the audio, using both the input filter and the reverb EQ. If you cut the low end or scoop out some mids, you can keep the level and reverb time up without muddying the mix, or you could boost the tops to to add a dreamy air to vocals or acoustic guitar.
Use the modulation control to add movement and harmonic complexity to shimmering sounds.
Try two instances in mono, panned Left and Right: this keeps the centre dry and there is much more sonic room to move.
Or exaggerate the pre-delay to keep the reverb out of the way.
Or send some signal from your delays into the reverb.
Don't be afraid to run an EQ after the reverb.
Or...or...

A great workhorse reverb, and of course you can run several instances at once!
Or use it alongside one of the other great UAD reverbs!

One last hint: make the reverb obvious and do your tweaking. When you are satisfied, drop the reverb level...less is usually more. Automate your levels (and even your tweaks) if you need the reverb to be more obvious at the end of vocal lines etc.

D. Craighead

15. Juli 2007

I think this is the best reverb for drums and percussions there is on the software market. It has a nice non-metallic sound, it's kinda hard to explain, very smooth. Way better than dreamverb in my opinion. Also nice when you put it to the Master-Out, EQ it just right and turn it on to 5%, it "glues" the end mix to one piece. And for this price it's better than tc.

R. Ravella

30. Dezember 2014

EMT 140 Classic Plate

Like all UAD plugins, this one is way WAY too expensive. Between the year end sale and the small $25 coupon that takes a tiny bite out of the cost, I purchased this for something closer to a reasonable price. It sounds very good, but then all my reverb plugins sound very good. This one sounds different, I have no personal experience with the real thing so I can't say if that difference is authentic, but it will likely be usable. If UA would stop trying to gouge their customers and act a bit less like Avid, they would probably sell enough more product to compensate and actually make more money in the end. But clearly, they're driven by greed. Like Avid.

C. Cormier

20. Dezember 2006

I'll have to be the lone dissenter here. I was disappointed by this plugin, after putting it through its paces. It's just murky and dull sounding. Dreamverb is probably my favorite UAD reverb. But put this up against Sonic Timeworks' gorgeous plate reverbs, or even TC-Helicons, all of which I spent a few days A/B/C'ing with, and it just sounds terrible.

m. casula

6. April 2015

problem with rever emt 140 (uad v.8)

hi, after I updated to uad 8 , reverb emt 140 no longer works , in version 7 uad I had bundled and now with uad 8 should I buy ?? annoyed for this ....
I hope someone can answer me , thanks

B. Kircher

8. Februar 2007

I bought a lot of plugs from UA (projpak, fairchild, cambridge, precEQ, preLim, BossFX, LA2A, 1176LN and the Plate 140).
After i mixed a demo (using only the Plate 140 as reverb), i brought the tape to a professional audio-engineer (he had several hits in the german charts).

His comment: "the reverb is not very satisfiying...".

WOW!

I trusted in all the comments and all the evaluations shown up in this area!

I recognized, not to trust in too many people - in the future i will trust my own ears.

Sure - plug-ins give you the possibility to get a certain quality to a low price.

But in my opinion it is only "good" but not "great".

There is a difference between hard- and software.

Please be honest.

Thank you, Bernie.

M. Wagner

15. Februar 2013

Love the Plate!

I LOVE plates, and the UAD EMY 140 delivers! I use it every day!

It is lush and warm, and sounds like the real thing! It is a must have for any UAD user, and for everyone else who doesn't use UAD, your a moron!

Matthew von Wagner
Producer/Engineer/Mixer
Crystal Castles
U.S.S.
Ko
Alpha Galates
Most Non Heinous

W. Kopka

20. September 2011

Hi, update on the UAD version 6 1 is no longer my EMT 140. what do I do now?

Waldemar

wkopka@aol.com

L. Zanello

13. November 2018

Il miglior reverbero di sempre..!!!

Consigliato da un amico...non posso più farne a meno..!!!

ユ. 平川

3. November 2018

Good

Beautiful Tail